The opening your cat climbs through — not the hole cut in your door.
Print on A4 at Actual size / 100%
Turn off “Fit to page” and “Shrink to fit”. Before cutting out the opening, measure the square on the PDF: it must be exactly 50 mm wide and 50 mm high.
A4 PDF · True-size passage guide
SureFlap Microchip Cat Flap
142 mm wide × 120 mm high
A cat flap-style surround with a true-size opening to cut out. The surround is illustrative; the cut-out matches the published passage width and height, not the exact edge contours.
A cat flap-style surround with a true-size opening to cut out. The surround is illustrative; the cut-out matches the published passage width and height, not the exact edge contours.
Pet size guide only. Never use these PDFs to cut a door or glass panel. A paper check is not a guarantee of fit; tunnel depth and curved edges also matter. Never force your cat through paper or card.
Is this the hole I should cut in my door?
No. These templates show the passage your cat climbs through, not the larger installation cutout or outer frame. Never use them to cut a door or glass panel. Existing glass cannot be cut; glass fitting requires a new toughened panel with a pre-cut hole.
How do I print a cat flap template at the right size?
Download the PDF, choose A4 paper and Actual size or 100% in your PDF print settings. Turn off Fit to page and Shrink to fit. Measure both sides of the calibration square: each must be 50 mm. If either measurement is wrong, do not use the print for sizing.
Will the paper opening guarantee my cat fits?
No. The rectangle matches the manufacturer's published passage width and height, not the exact curved edges, tunnel depth or moving flap. Use it as an initial size guide only. Compare your cat's measurements and allow comfortable clearance; never force your cat through paper or card.
Why are only two models available?
These two templates use passage dimensions checked against the manufacturer's UK support pages. Other models will need their own verified passage measurements; do not substitute a frame size, fitting cutout or another model's template.